Service Guide

Hardware Installations and Upgrades
Intel® Server System SC5650HCBRP Service Guide 63
Figure 71. Deattaching Hot Swap Power Supply Cage from Inside of Chassis
8. Remove five external screws securing back of power supply cage to chassis. Slide the power supply cage
out of the chassis.
/
NOTE
You may have to work the power cables through slot openings with your free hand as
you remove the power supply cage from the chassis.
Figure 72. Deattaching Hot Swap Power Supply Cage from Rear of Chassis
9. Remove the two screws (see letter “A” in the following figure) attaching the rear support bracket to the old
power supply cage. Remove the rear support bracket (see letter “B”).
Figure 73. Removing Rear Support Bracket from Hot Swap Power Supply Cage
10. Attach the rear support bracket to the new power supply cage with the two screws removed from the
previous step.