Service Guide

Hardware Installations and Upgrades
66 Intel
®
Server System SC5650HCBRP Service Guide
Install Rubber Feet for a Pedestal-configured Chassis
/
NOTE
Do not install feet on your Intel
®
Server System SC5650HCBRP if it is to be installed
in a rack. Only install feet on a pedestal-configured chassis.
1. Observe the safety and ESD precautions listed in “Appendix B: Safety Information”..
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Lay the chassis down on its right side.
4. Insert rubber foot into chassis hole (see letter “A” in the following figure). Secure foot to chassis by
inserting a pin through the rubber foot (see letter “B”). Repeat process for remaining feet.