Service Guide

Technical Reference
78 Intel
®
Server System SC5650HCBRP Service Guide
5 Technical Reference
Power Supply Specification
600-W Hot Swap Power Supply Input Voltage
 100-127 V at 50/60 Hz; 12 A max.
 200-240 V at 50/60 Hz; 7 A max.
600-W 1+1 Hot Swap Power Supply Output Voltages
The following table lists the total wattage available from the power subsystem for each voltage. Ensure your
loads do not exceed the combined total wattage of 670 W. For information about calculating the power usage
for your configuration, see “Calculation Power Usage.”
Table 9. 600-W 1+1 Hot Swap Power Supply Output Capability
V
oltage Maximum Current
+ 3.3 V 24 A
+5 V 30 A
+12 V1 16 A
+12 V2 16 A
+12 V3 16 A
+12 V4 16 A
-12 V 0.3 A
+5 VSB 3.0 A
WARNING
Maximum continuous total DC output power should not exceed 570W.
Combined 3.3V and 5V power shall not exceed 170W.
The expansion slots on the server board are rated for no more than 25W for any one slot. The
average current usage per slot should not exceed 13W.