SOL White Paper

• Once you have rebooted and engaged the DPCCLI console, you will see the EMS console.
You can now issue the various SAC commands described in above Table. For example, to
start a command prompt, the commands are as follows.
Tip: After you start the DPCCLI console, if you only get a blank screen, press Enter a few
times to get the SAC> prompt.
Figure 6. EMS Console
• Key in “ch –si” command to login into Windows OS command line environment
NOTE: In Login screen, key in username/domain name/password for authorization.
Now, you are under Windows Command Line Prompt:
Figure 7. Login into Windows* command line prompt
Page 11 5/26/2010