Specification update

Enterprise Platforms and Services MarketingEnterprise Platforms and Services Division
Monthly Specification Upd
6
Implication Users needing more than twelve USB devices on the system may experience
system hangs during POST.
Status This issue was resolved in BIOS revision R0030.
Workaround None.
4.
Excessive Temperature does not trigger a Thermal Trip event
Problem If the I/O Hub (IOH) of the Tylersburg chipset is heated beyond thermal limits, a
thermal trip event is not generated.
Implication Excessive heat on the IOH for extensive lengths of time may damage or lower
the expected life of the integrated Circuit (IC).
Status This issue was resolved in BIOS revision R0029 and BMC revision 31.
Workaround None.
5.
Hyper Threading cannot be disabled in BIOS setup
Problem In the BIOS Setup Menu: \Advanced\Processor, setting the Hyper Threading
option to disabled will initially indicate the option is disabled. However, when
the user re-enters BIOS Setup, the option will be enabled.
Implication Users that desire to disable Hyper Threading will not be able to do so.
Status This issue was fixed in BIOS release R0034.
Workaround None.
6.
A critical interrupt is logged in the System Event Log (SEL) when installing
SuSE* SLES 10 SP2 32 bit
Problem A critical interrupt, PCIe Fat Sensor –[severity] event: Critical Interrupt, is
looged during the installation of SuSE* SLES 10 SP2 32 bit.
Implication The user will see a PCIe crtical event looged. There is no functional impact.
Status No Fix.