Specification update

Monthly Specification UpdateEnterprise Platforms and Services Marketing
Enterprise Platforms and Services Divis
7
Workaround Add “noisapnp” to the command line option to prevent scanning of a ISA plug
and play devices.
7.
Errors are reported during the installation of SuSE* SLES 10 SP2 EM64T
Problem When installing SuSE* SLES 10 SP2 EM64T with Advanced Error Reporting
(AER) capabilites enabled, an AER error is logged in the operating system
event log.
Implication AER uses an optional ACPI requirement, -OCS, that is not available in the
S5500 BIOS revisions. There is no functional impact.
Status This issue may be fixed in a future BIOS revision.
Workaround None.
8.
In SATA compatibility mode the operating system may take more than four
hours to install
Problem When the BIOS setup option: \Advanced\Mass Storage Controller
Configuration\Configure SATA Mode is set to Compatiblity mode, Red Hat*
RHEL 5 UP2 may take in excess of four hours to install.
Implication Users may experience an extended installation time when SATA Mode is
configured as Compatilbility mode and installing Red Hat* RHEL 5 UP2.
Status This issue was fixed in BIOS 33 and BMC 34.
Workaround None.
9.
Serial Console mode may display extra text or intermingled text
Problem When operating in serial console mode, during POST the user may notice 1 of
2 conditions.
1. The user may see the numeral 10 displayed at the top right corner of the
screen or