Specification update

Monthly Specification UpdateEnterprise Platforms and Services Marketing
Enterprise Platforms and Services Divis
17
Status This issue is fixed by FRUSDR25.
Workaround None.
29.
Processor 01 Fan sensor may not display as expected in FRUSDR25
Problem When users update FRUSDR25 and select “Intel
®
Server Chassis
SC5650BRP” or “Intel
®
Workstation Chassis SC5650WS” in the update
process, users may find Processor 01 fan sensor disappear once FRUSDR
update is completed.
Implication Users may not be able to check processor 01 fan sensor status.
Status This issue is fixed by FRUSDR28.
Workaround None.
30.
Inaccurate HSC FW revision displayed in BIOS configuration GUI
Problem With baseboard BIOS version R0050 and BMC version 53, the HSC FW
revision may be inaccurately shown as 123.415 instead of 0.00 if there is no
backplane connected to the board or system. HSC FW revision is located at
the BIOS setup Server Information page (Server Management – Sever
Information – HSC Firmware Revision).
Implication There is no functional impact associated with this erratum.
Status This erratum may be fixed in future BIOS release.
Workaround None.
31.
System may go to EFI first instead of Hardware Raid configuration setup
page
Problem When using Hardware Raid and setting EFI boot sequence in the first boot
device, if Ctrl+G is pressed during POST, system first goes to EFI, not to
Hardware Raid configuration setup page.
Implication There is no functional impact associated with this erratum.