Specification update

Enterprise Platforms and Services MarketingEnterprise Platforms and Services Division
Monthly Specification Upd
18
Status Will not fix.
Workaround 1, Change EFI booting order instead of first boot device.
2, Type “EXIT” in Internal EFI shell, then users can enter Raid configuration
setup page.
32.
Lower network performance may be observed when Hyper-V role is
added in Windows* Server 2008 R2 with more than 32GB memory
Problem On a dual Intel
®
Xeon
®
5600 series processor configuration with more than
32GB memory installed, user may notice network performance drop in
Windows Server 2008 R2* when Hyper-V role is added.
Implication User may see lower than expected network performance under Windows Sever
2008 R2*.
Status This issue was fixed on BIOS 55 and later version. Change the setting in BIOS
setup Advanced -> PCI -> Maximize/minimum Memory below 4G to Min.
Workaround Reduce memory size to less than 32GB.
33.
System may not enter LSI* 9260-4i/8i RAID card webBIOS when both
LSI* 9260-4i/8i and LSI* 20320-R SCSI card installed
Problem System may not enter LSI* 9260-4i/8i RAID card webBIOS with both LSI*
9260-4i/8i RAID card and LSI* 20320-R SCSI card installed
Implication User may find not able to go into LSI* 9260-4i/8i RAID card webBIOS even
Ctrl+H was pressed.
Status This issue may be fixed in a future BIOS revision.
Workaround Press CTRL key again when see blinking cursor, the blinking cursor will be on
the top left corner when Ctrl+H was pressed.
34.
System with BIOS Revision R0054 may hang when Adaptec* 5405 or
5805 RAID card installed