Technical Product Specification

Functional Architecture Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS
Revision 1.9
Intel order number E39529-013
50
Table 14. Video Modes
2D Mode
2D Video Mode Support
8 bpp
16 bpp
24 bpp
32 bpp
640 x 480
Supported
Supported
Supported
Supported
60, 72, 75, 85
60, 72, 75, 85
60, 72, 75, 85
60, 72, 75, 85
Refresh Rate
(Hz)
800 x 600
Supported
Supported
Supported
Supported
56, 60, 72, 75, 85
56, 60, 72, 75, 85
56, 60, 72, 75, 85
56, 60, 72, 75, 85
Refresh Rate
(Hz)
1024 x 768
Supported
Supported
Supported
Supported
60, 70, 75, 85
60, 70, 75, 85
60, 70, 75, 85
60, 70, 75, 85
Refresh Rate
(Hz)
1152 x 864
Supported
Supported
Supported
N/A
75
75
75
N/A
Refresh Rate
(Hz)
1280 x 1024
Supported
Supported
Supported
N/A
60, 75, 85
60, 75, 85
60
NA
Refresh Rate
(Hz)
1440 x 900
Supported
Supported
Supported
N/A
60
60
60
NA
Refresh Rate
(Hz)
1600 x 1200
Supported
Supported
N/A
N/A
60. 65, 70, 75, 85
60. 65, 70
N/A
N/A
Refresh Rate
(Hz)
3.11.2 Dual Video
The BIOS supports single- and dual-video modes. The dual-video mode is enabled by default.
 In single mode, the onboard video controller is disabled when an add-in video card is
detected.
 In dual mode (enable ―Dual Monitor Video‖ in the BIOS setup), the onboard video
controller is enabled and is the primary video device. The add-in video card is allocated
resources and considered the secondary video device.
 The BIOS Setup utility provides options on Advanced | PCI Configuration Screen to
configure the feature as follows:
Onboard Video
Enabled
(default)
Disabled
Dual Monitor Video
Enabled
Shaded if onboard video is set to "Disabled"
Disabled
(Default)