User Guide

Intel
®
System Information Retrieval Utility - User Guide 7
( Platform Firmware Inventory, Sensor information, Sensor Data Records,
BMC SEL (IN HUMAN READABLE FORM), BMC SEL (IN HEX FORM), Base Board
FRU, System BMC Boot Order, BMC User Settings, BMC LAN Channel Settings,
BMC SOL Channel Settings, BMC Power Restore Policy Settings, BMC channel
settings, SMBIOS Type 1, Type 2, Type 3, Processor,Memory, Operating
System Information, Device drivers installed, List of S/W installed,).
b. RAID_NVRAMlog.txt (RAID settings and RAID log)
c. PCI_Log.txt (PCI Bus info).
d. OSEvents_Log.txt (operating System Events).
B. RPM Installation
1. Copy sysinfo rpm from Linux/RHEL or Linux/SLES (for RHEL or SLES respectively)
to local folder.
2. Install sysinfo utility by using "rpm -Uvh sysinfo-Vxx.x-Bxx.ixxx.rpm". This will
install the utility in "/usr/bin/sysinfo/"
3. On RHEL/SLES after installing the rpm close the terminal from which rpm was
installed and then execute utility from a new terminal (example: "# sysinfo -ni").
2.3.3 Uninstallation
This section explains the steps to uninstall the Intel
®
System Information Retrieval Utility.
I. RPM Un-Installation:
-----------------
1. To uninstall the utility use "rpm -e sysinfo" command.
II. Regular Un-Installation:
---------------------
1. Run the './uninstall.sh' present in Linux/RHEL folder or Linux/SUSE folder
depends on Linux distribution.
2. Remove the Linux folder.