Users guide

107 Intel® RAID Software User Guide
—The Link Speed column shows the phy link speeds.
3. Select the desired link speed by using the drop-down list.
The link speed values are Auto,1.5Gb/s, 3Gb/s, 6Gb/s, or 12Gb/s.
Note: By default, the li
nk speed in the controller is Auto or the value last saved by
you.
4. Press OK.
A message box appears, asking you to restart your system
for the changes to take
effect.
5. Press OK.
The link speed value is now reset. The change takes place after you restart the
system.
7.13.9 Managing Power Save Settings for the Controller
You can change the controller’s power-save settings by using the Dimmer Switch
enhancement (Power-Save mode).
Perform the following steps to change the power save settings:
1. Navigate to the second Contr
oller Settings screen.
2. Navigate to Man
age Power Save, and press Enter.
The Manage Power Save dialog appea
rs.
Figure 48. Manage Power Save
3. Select the Spin
down Unconfigured drives check box to let the controller enable
the unconfigured drives to enter the Power-Save mode.