Users guide

Intel® RAID Software User Guide 174
Figure 99. Option to Close the Configuration Wizard
If you select Ye
s, the configuration procedure closes. If you select No, the dialog
box closes and you remain on the same page.
9.12 Creating a Virtual Drive Using Advanced
Configuration
The advanced configuration procedure provides an easy way to create a new storage
configuration. Advanced configuration gives you greater flexibility than simple
configuration because you can select the drives and the virtual drive parameters when you
create a virtual drive. In addition, you can use the advanced configuration procedure to
create spanned drive groups.
Follow these steps to create a new storage configuration in the advanced configuration
mode. In this example, we will create a spanned drive group.
1. Perform either of the following steps:
— Right click on the controller
node in the device tree in the left frame of the
Intel
®
RAID Web Console 2 window and select Create Virtual Drive
— Select the controller node and select Go T
o -> Controller -> Create Virtual
Drive in the menu bar, as shown in Figure 100