Users guide

203 Intel® RAID Software User Guide
If the physical drives are in a disk enclosure, you can identify which physical drive is
represented by a disk icon on the left. To do this, follow these steps:
1. Click the physical disk icon i
n the left panel.
2. Click the Go
To -> Physical Drive tab.
3. Click S
tart Locating Drive (see Figure 128).
Figure 128. Locating a Physical Drive
The LED on the physical disk drive in the en
closure starts blinking to show its
location.
Note: LEDs on global or
dedicated hot-spare drives do not blink.
4. To stop the disk drive light from blinking, click St
op Locating Drive.