Users guide

Intel® RAID Software User Guide 208
9.21.7.1 Setting Learn Cycle Properties
To set the learn cycle properties, perform the following steps:
1. Click the Ph
ysical tab to open the physical view.
2. Select the BBU icon in the left panel.
3. Click the Go T
o -> BBU tab.
The BBU operations appear, as shown in F
igure 133 (Depending on different utility
version, the BBU operation also may appear in a new pop-up window).
Figure 133. Battery Backup Unit Operations
4. Select Set Learn Cycle Pr
operties.
The options appear in the right frame.
5. To enable automatic learn cycles, click Enable automatic learn cycles an
d click
Go.
You can delay the start of the next learn cycle by
up to 7 days (168 hours) using the
Delay next learn cycle field.
6. To disable automatic learn cycles, click Dis
able automatic learn cycles and click
Go.
You can start the learn cycles manually. In addition,
you can check the box next to
the field Remind me when to start a learn cycle to receive a reminder to start a
manual learn cycle.