Users guide

209 Intel® RAID Software User Guide
9.21.7.2 Starting a Learn Cycle Manually
To start the learn cycle properties manually, perform the following steps:
1. Click the Physical tab to
open the physical view.
2. Select the BBU icon
in the left panel.
3. Click the Go
To -> BBU tab.
The BBU operations appear, as shown in Figure 133 (Depending on different utility
version, the BBU operation also may appear in a new pop-up window).
4. Click S
tart Learn Cycle and click OK.
Another method to use the BBU operations is to right-click
the BBU icon to open
the operations menu and select Start Learn Cycle.
9.21.8 Monitoring Rebuilds and Other Processes
The Intel
®
RAID Web Console 2 allows you to monitor the progress of rebuilds and other
lengthy processes in the Group Show Progress window, shown in Figure 134. You open
this window by selecting Manage -> Show Progress.
Figure 134. Group Show Progress Window
Operations on virtual disks appear in the left panel of the window, and operations on
ph
ysical drives appear in the right panel. The types of operations that appear in this
window are as follows:
• Initialization of a virtual disk (see “Initializing a Virtual Disk” on page 211).
• Rebuild (see “Rebuilding a Drive” on page 214).