Users guide

Intel® RAID Software User Guide 234
Figure 155. Snapshot Base is shown
9. Following steps create Snapshots and Views
, based on above configurations for
Snapshot Base and Snapshot Repository.
Note: Y
ou can create up to eight snapshots of a volume. snapshots are showed in
chronological order from the oldest to the newest. Each snapshot is a PiT
snapshot of the virtual drive that is the Snapshot Base.
The snapshots appear on the timeline from the
oldest on the left to the newest
on the right. If you create the maximum number of snapshots allowed, eight,
the Create Snapshot button is disabled. You cannot create an additional
snapshot unless you delete a snapshot.
After you create the snapshots, you can create views of the PiT snapshots. You
can search the views to find a snapshot that does not contain corrupt data or a
snapshot that contains deleted data, depending on the situation. You can
reboot and roll back to that snapshot to restore the data.
10. Click the Logical
view on the main menu screen. Click the Snapshot Base virtual
drive in the left frame. Click the Snapshots tab in the right frame.