Users guide

249 Intel® RAID Software User Guide
• VMware* ESX 4.1 U2
• VMware* ESXi 4.1 U2
• VMware* ESXi 5.0 U1
• Solaris*
• FreeBSD (32/64 bit)
• EFI
• Ubuntu*
Note: The L
SISAS2208 and LSISAS2108 controllers provide support for Microsoft Windows 8
and Microsoft Windows Server 2012 operating systems.
10.3.1 Installing StorCLI on Microsoft Windows Operating
Systems
The Windows StorCLI binary is provided in a binary format, and no separate installation
is required.
1. Copy the binary file from the CD or fr
om the Intel website.
2. Place the binary file in the directory from which you want to run the Storage
Co
mmand Line Tool, and run the tool.
Note: S
torCLI must be run with the administrator privileges.
10.3.2 Installing StorCLI on Linux Operating Systems
To install StorCLI on Linux operating systems, perform the following steps:
1. Unzip the StorCLI package.
2. To install the StorCLI RPM, run the
rpm -ivh <StorCLI-x.xx-
x.noarch.rpm
> command.
3. To upgrade the StorCLI RPM, run the
rpm -Uvh <StorCLI-x.xx-
x.noarch.rpm
> command.
10.3.3 Installing StorCLI on Ubuntu Operating Systems
To install StorCLI on the Ubuntu operating systems, perform the following steps:
Note: Ru
n all the commands using the super user (sudo) login.
1. Run the command
sudo dpkg -i storcli_1.0_all.deb for installing the
debian package.
2. Run the command
dpkg -l | grep -i storcli for verifying if the debian
package was installed successfully or not.