Users guide

Intel® RAID Software User Guide 252
Note: If enclosures are not used to connect physical drives to the controller, you do not specify
the enclosure ID in the command.
The StorCLI tool supports the following verbs.
Table 18. Verbs in the StorCli Command Syntax
/cx/pall This object identifier is for all PHY operations on controller x.
/cx/bbu This object identifier is for a bbu
x on controller x.
/cx/cv This object identifier is for a cache vault
x on controller x.
Object Identifier Description
Verb Description
add This verb adds virtual drives, JBODs, and so on to the object identifier.
del This verb deletes a drive, value, or property of the object identifier.
set This verb sets a value of the object identifier.
show This verb shows the value and prope
rties of the object identifier.
pause This verb pauses an ongoing operation.
resume This verb resumes paused operation.
suspend This verb suspends an ongoing operation
. A suspended operation cannot
be resumed.
compare This verb compares an input value with a system value.
download This verb downloads and flashes a file to the target.
start This verb starts an operation.
flush This verb flushes a controller cache or a drive cache.
stop This verb stops an operation that is in p
rogress. A stopped process cannot
be resumed.
import This verb imports the foreign configu
ration into the drive.
expand This verb expands the size of the virtual drive.
insert This verb replaces the configured dri
ve that is identified as missing, and
starts an automatic rebuild.
flasherase This verb erases the flash memory on the controller.
transform This verb downgrades the firmware memory on the controller.
restart This verb restarts the contr
oller without a system reboot.
apply This verb applies the activation Key to a WarpDrive.