Users guide

253 Intel® RAID Software User Guide
• <[adverb | attributes | properties] > – Specifies what the verb
modifies or displays.
• <[key=value]> – Specifies a value, if a value is required by the command.
10.5 Working with the Storage Command Line
Tool
This section describes the commands supported by the Storage Command Line Tool.
Note: Th
e Storage Command Line Tool is not case sensitive.
Caution: Th
e order in which you specify the command options must be the same as in the User
Guide; otherwise, the command will fail.
Note: Th
e Storage Command Line Tool does not support the Snapshot feature.
10.5.1 System Commands
10.5.1.1 System Show Commands
The Storage Command Line Tool supports the following system show commands:
storcli show
storcli show all
storcli show ctrlcount
storcli show help
storcli -v
The detailed description for each command follows.
storcli show
This command shows a summary of controller and controller-associated information for
the system. The summary includes the number of controllers, the host name, the operating
system information, and the overview of existing configuration.
storcli show all
This command shows the list of controllers and controller-associated information,
information about the drives that need attention, and advanced software options.
storcli show ctrlcount
This command shows the number of controllers detected in the server.
storcli show help
This command shows help for all commands at the server level.