Users guide

257 Intel® RAID Software User Guide
storcli /cx set restorehotspare=<on|off>
storcli /cx se
t smartpollinterval=<value>
storcli /cx se
t spinupdelay=<value>
storcli /cx se
t spinupdrivecount=<value>
storcli /cx se
t stoponerror=<on|off>
storcli /cx se
t usefdeonlyencrypt=<on|off>
storcli /cx se
t time=yyyymmdd hh:mm:ss|systemtime
storcli /cx se
t usefdeonlyencrypt=<on|off>
The following table lists and describes the properties for the show and set commands.
Table 20. Properties for Show and Set Commands
Property Name Set Command Range Description
abortcconerror on|off Aborts consistency check when it
d
etects an inconsistency.
activityforlocate on|off Enables/disables drive activity,
drive activity locates function for
systems without SGPIO/SES
capabilities.
alarm on|off|silence
silence:
Silences the alarm.
Enables/disables alarm on critical
errors.
backplane 0: Use autod
etect logic of
backplanes, such as SGPIO and
I
2
C SEP using GPIO pins.
1: Disable autodetect SGPIO.
2: Disab
le I
2
C SEP autodetect.
3: Disable both the autodetects.
Configures enclosure detection
on a
non-SES/expander
backplane.
batterywarning on|off Enables/disables battery
wa
rnings.
bgirate 0 to 100 Sets background initialization rate
i
n percentage.
cacheflushint 0 to 255, default value 4 Sets cache flush interval in
seconds.
ccrate 0 to 100 Sets consistency check rate in
p
ercentage.
coercion 0: No coercion
1: 128 MB
2: 1 GB
Sets drive capacity in coercion
mode.
consistencycheck See “Consistency Check” on
page263.
See “Consistency Check” on
page26
3.