Users guide

277 Intel® RAID Software User Guide
Input example:
storcli /c0/e3/s4,5 add hotsparedrive
This command sets the drives /c0/e3/s4,5 as Global Hot spare.
Input example:
storcli /c0/e3/s6,8 add hotsparedrive dgs=0,1
This command sets /c0/e3/s6,8 as Dedicated Hot spare for disk groups 0,1.
storcli /cx/[ex]/sx delete hotsparedrive
This command deletes a hot spare drive.
Input example:
storcli /c0/e3/s4,5 delete hotsparedrive
10.5.4 Virtual Drive Commands
The Storage Command Line Tool supports the following virtual drive commands. The
following table describes frequently used virtual drive commands.
Table 29. Virtual Drives Commands Quick Reference Table
enclaffinity Valid enclosure number Specifies the enclosure with which the hot
spare is associated. If this option is
specified, affinity is set; if it is not specified,
there is no affinity.
Affinity cannot be removed after it is set for
a hot
spare drive.
nonrevertible — Sets the drive as a nonrevertible hot spare.
Option Value Range Description
Command Value Range Description
add See Table30 and Table31. Creates virtual drives.
delete cc or cachecade: Deletes CacheCade* virtual
drives.
force:
Deletes the virtual drive where operating
system is present.
Deletes a virtual drive.
set See Table30, Table31, and “Change Virtual
Properties Commands” on page28
3.
Sets virtual drive
prop
erties.
show all: Shows all
properties of the virtual drive.
cc: Shows prop
erties of CacheCade virtual drives.
See “Virtual Drive Show Commands” on page282.
Shows virtual drive
information.