Users guide

Intel® RAID Software User Guide 282
Note: This command deletes the virtual drive where the operating system is present. Data
located on these drives and the operating system of the drive will no longer be accessible.
10.5.4.3 Virtual Drive Show Commands
The Storage Command Line Tool supports the following virtual drive show commands:
storcli /cx/vx show
storcli /cx/vx show
all
The detailed description for each command follows.
storcli /cx/vx show
This command shows the summary of the virtual drive information.
Input example:
storcli /c0/v0 show
storcli /cx/vx show
all
This command shows all virtual drive information, which includes virtual drive
information, physical drives used for the virtual drives, and virtual drive properties.
Input example:
storcli /c0/v0 show all
10.5.4.4 Preserved Cache Commands
If a virtual drive becomes offline or is deleted because of missing physical disks, the
controller preserves the dirty cache from the virtual disk. The Storage Command Line
Tool supports the following commands for preserved cache:
storcli /cx/vx delete preservedCache [force]
storcli /cx show pre
servedCache
The detailed description for each command follows.
storcli /cx/vx delete preservedcache
This command deletes the preserved cache for a particular virtual drive on the controller
in missing state. Use the
force option to delete the preserved cache of a virtual drive in
offline state.
Input example:
storcli /c0/v1 delete preservedcache
storcli /cx show pre
servedCache
This command shows the virtual drive that has preserved cache and whether the virtual
drive is offline or missing.
Input example:
storcli /c0 show preservedCache