Users guide

285 Intel® RAID Software User Guide
Input example:
storcli /c0/v2 show init
storcli /cx/vx start init [full]
This command starts the initialization of a virtual drive. The default initialization type is
fast initialization. If the fulloption is specified, full initialization of the virtual drive starts.
Input example:
storcli /cx/vx start init [full]
storcli /cx/vx stop init
This command stops the initialization of a virtual drive. A stopped initialization cannot be
resumed.
Input example:
storcli /c0/v0 stop init
10.5.4.7 Virtual Drive Erase Commands
The Storage Command Line Tool supports the following commands to erase virtual
drives:
storcli /cx/vx erase
storcli /cx/vx show erase
The detailed description for each command follows.
storcli /cx/vx erase
This command erases the data on the virtual drive.
Input example:
storcli /c0/v0 erase
storcli /cx/vx show erase
This command shows the status of the erase operation on the virtual drive.
Input example:
storcli /c0/v0 show erase
10.5.4.8 Virtual Drive Migration Commands
Note: The virtual drive migration commands are not supported in Embedded Intel
®
RAID.
The Storage Command Line Tool supports the following commands for virtual drive
migration (reconstruction):
storcli /cx/vx show migrate
storcli /cx/vx start migrate <type=raidlevel> [option=<add|remove>
disk=<e1/s1,e2
/s2 ...> ]