Users guide

287 Intel® RAID Software User Guide
Input example:
storcli /c0/v3 start migrate type=r5 option=add disk=e5:s2,e5:s3
10.5.4.9 Virtual Drive Consistency Check Commands
The Storage Command Line Tool supports the following commands for virtual drive
consistency checks:
storcli /cx/vx pause cc
storcli /cx/vx resume cc
storcli /cx/vx show cc
storcli /cx/vx start cc [force]
storcli /cx/vx stop cc
Note: If enclosures are used to connect the physical drives to the controller, specify the IDs in
the command.
The detailed description for each command follows.
storcli /cx/vx pause cc
This command pauses an ongoing consistency check process. You can resume the
consistency check at a later time. You can run this command only on a virtual drive that
has a consistency check operation running.
Input example:
storcli /c0/v4 pause cc
storcli /cx/vx resume cc
This command resumes a suspended consistency check operation. You can run this
command on a virtual drive that has a paused consistency check operation.
Input example:
storcli /c0/v4 resume cc
storcli /cx/vx show cc
This command shows the progress of the consistency check operation in percentage.
Input example:
storcli /c0/v5 show cc
RAID 5 RAID 6
RAID 6 RAID 0
RAID 6 RAID 5
Initial RAID Level Migrated RAID Level