Users guide

Intel® RAID Software User Guide 288
storcli /cx/vx start cc force
This command starts a consistency check operation for a virtual drive. Typically, a
consistency check operation is run on an initialized virtual drive. Use the
force option to
run a consistency check on an uninitialized drive.
Input example:
storcli /c0/v4 start cc
storcli /cx/vx stop
cc
This command stops a consistency check operation. You can run this command only for a
virtual drive that has a consistency check operation running.
Input example:
storcli /c0/v4 stop cc
Note: You cannot resume a stopped consistency check process.
10.5.4.10 Background Initialization Commands
The Storage Command Line Tool supports the following commands for background
initialization:
storcli /cx/vx resume bgi
storcli /cx/vx set a
utobgi=<on|off>
storcli /cx/vx show
autobgi
storcli /cx/vx show
bgi
storcli /cx/vx stop
bgi
storcli /cx/vx suspe
nd bgi
The detailed description for each command follows.
storcli /cx/vx resume bgi
This command resumes a suspended background initialization operation.
Input example:
storcli /c0/v0 resume bgi
storcli /cx/vx set a
utobgi=<on|off>
This command sets the auto background initialization setting for a virtual drive to on or
off.
Input example:
storcli /c0/v0 set autobgi=on
storcli /cx/vx show
autobgi
This command shows the background initialization setting for a virtual drive.