Users guide

Intel® RAID Software User Guide 298
storcli /cx/ex show status
This command shows the enclosure status and the status of all the enclosure elements.
Input example:
storcli /c0/e0 show status
10.5.11 PHY Commands
The Storage Command Line Tool supports the following PHY commands:
storcli /cx/px|pall set linkspeed=0(auto)|1.5|3|6|12
storcli /cx/px|pall show
storcli /cx/px|pall show
all
The detailed description for each command follows.
storcli /cx/px|pall set linkspeed=0(auto)|1.5|3|6|12
This command sets the PHY link speed. You can set the speed to 1.5 Gb/s, 3 Gb/s, 6 Gb/s,
or 12 Gb/s. The linkspeed is set to
auto when you specify linkspeed = 0.
Input example:
storcli /c0/p0 set linkspeed=1.5
storcli /cx/px|pall show
This command shows the basic PHY layer information.
Input example:
storcli /c1/p0 show
storcli /cx/px|pall show
all
This command shows all the PHY layer information.
Input example:
storcli /c1/p0 show all
10.5.12 Logging Commands
The Storage Command Line Tool supports the following commands to generate and
maintain log files:
storcli /cx clear events
storcli /cx delete t
ermlog
storcli /cx show eve
nts file=<absolute path>
storcli /cx show eve
ntloginfo
storcli /cx show ter
mlog type=config|contents
The detailed description for each command follows.