Users guide

303 Intel® RAID Software User Guide
10.7 Unsupported StorCLI Commands
The commands in the following table are not supported for the Intel
®
RAID Controllers
such as Intel
®
RAID Controller RS3WC080.
Table 37. Unsupported Commands fors Intel
®
RAID Controller
Command Group Command
Jbod storcli /c0 set jbod=<on|off>
storcli /c0/s2 set jbod
storcli /c0/s2 set bootdrive=<on|off>
DS storcli /cx(x|all) set
ds=OFF type=1|2|3|4
storcli /cx(x|all) set
ds=ON type=1|2 [properties]
storcli /cx(x|all) set
ds=ON type=3|4
DefaultLdType=<val> [properties]
storcli /cx(x|all) set
ds [properties]
storcli /cx/v
(x|all) set
ds=Default|Auto|None|Max|MaxNoCache
Security storcli /cx delete security key
storcli /cx set securitykey=xxxx
xxxx {passphrase=xxxx}
{keyid=xxx}
storcli /cx set securitykey keyid=xxx
storcli /cx compare securitykey=xxxxxx
xxxx
storcli /cx set
secur
itykey=xxxxxxxx oldsecuritykey=xx
xxxxxx