Users guide

Intel® RAID Software User Guide 324
240 Info VDs missing at boot: %s
241 Info Previous configuration completely missing at boot
242 Info Battery charge complete
243 Info Enclosure %s fan %d speed changed
244 Info Dedicated spare %s imported as global due to missing arrays
245 Info %s rebuild not possible as SAS/SATA is not supported in an array
246 Info
SEP %s has been rebooted as a part of enclosure firmware download.
SEP will be unavailable until this process completes.
247 Info Inserted PD: %s Info: %s
248 Info Removed PD: %s Info: %s
249 Info VD %s is now OPTIMAL
250 Warning VD %s is now PARTIALLY DEGRADED
251 Critical VD %s is now DEGRADED
252 Fatal VD %s is now OFFLINE
253 Warning Battery requires reconditioning; please initiate a LEARN cycle
254 Warning VD %s disabled because RAID-5 is not supported by this RAID key
255 Warning VD %s disabled because RAID-6 is not supported by this controller
256 Warning VD %s disabled because SAS drives are not supported by this RAID key
257 Warning PD missing: %s
258 Warning Puncturing of LBAs enabled
259 Warning Puncturing of LBAs disabled
260 Critical Enclosure %s EMM %d not installed
261 Info Package version %s
262 Warning Global affinity Hot Spare %s commissioned in a different enclosure
263 Warning Foreign configuration table overflow
264 Warning Partial foreign configuration imported, PDs not imported:%s
265 Info Connector %s is active
266 Info Board Revision %s
267 Warning Command timeout on PD %s, CDB:%s
Number Type Description