Specifications

Intel

Server System SR1630GPRX/SR1630HGPRX Service Guide 83

5. Insert the replacement power supply at an angle into the server system, sliding the

power connector side in first to fit it through the cut-out area at the rear of the

system (see letter “C” in Figure 65).

6. Set the front of the power supply down by pushing the power supply back. Insert

and fasten both the screws you removed in Step 4.

Figure 65. Installing Power Supply Module into the Server System

(SR1630HGPRX)

7. Insert the screw you removed in Step 2 to attach the power supply to the server

system. See letter “A” in Figure 65.

8. Connect the power supply cables to the server board and peripherals.

9. Install the server system cover. For instructions, see “Installing the Server System

Cover”.

AF003378