Datasheet

ManualsBrandsIntel Manualscomputers & electronicsSSDMAEMC080G2

Order Number: 324042-007US

February 2011

Intel

Solid-State Drive 310 Series

SSDMAEMC040G2XX, SSDMAEMC080G2XX

Product Specification

 Capacity: 40 GB, 80 GB

 Components: Intel

34nm NAND Flash Memory

Multi-Level Cell (MLC)

 Read and Write IOPS

(Iometer* Queue Depth 32)

—40 GB

Random 4 KB reads: Up to 25 K IOPS

Random 4 KB writes: Up to 2.5 K IOPS

—80 GB

Random 4 KB reads: Up to 35 K IOPS

Random 4 KB writes: Up to 6.6 K IOPS

 Bandwidth Performance

—40 GB

Sustained sequential read: Up to 170 MB/s

Sustained sequential write: Up to 35 MB/s

—80 GB

Sustained sequential read: Up to 200 MB/s

Sustained sequential write: Up to 70 MB/s

 Latency

—40 GB

Read: 65 µs (TYP)

Write: 110 µs (TYP)

—80 GB

Read: 65 µs (TYP)

Write: 75 µs (TYP)

 Compatibility

—Intel

SSD Toolbox with Intel

SSD Optimizer

—Intel

Rapid Storage Technology

— SATA Revision 2.6; compatible with

SATA 1.5 Gb/s and 3 Gb/s interface rates

— ATA/ATAPI-7

— SSD-enhanced S.M.A.R.T. ATA feature set

— Native Command Queuing (NCQ)

command set

— Data set management command

Trim attribute

 Form Factor: Full-sized mSATA

— Dimensions: 50.80 mm by 29.85 mm

— Thickness: < 4.85 mm

— Weight: < 10 grams

 Power Management

— 3.3 V mSATA supply rail

— SATA interface power management

 Power (MobileMark* 2007 Workload)

— Active: 150 mW (TYP)

— Idle: 75 mW (TYP)

 Temperature

—Operating: 0

C to 70

— Non-Operating: -55

C to 95

 Shock (operating and non-operating)

— 1,500 G/0.5 msec

 Vibration

— Operating: 2.17 G

RMS

(5-700 Hz)

— Non-operating: 3.13 G

RMS

(5-800 Hz)

 Reliability

— Uncorrectable Bit Error Rate (UBER):

1 sector per 10

bits read

— Mean Time Between Failures (MTBF):

1,200,000 hours

 Certifications and Declarations

—UL*

—CE*

—C-Tick*

—BSMI*

—KCC*

—Microsoft* WHQL

— VCCI*

—SATA-IO*

 Product Ecological Compliance

—EU RoHS*

—Low Halogen**

Summary of content (22 pages)

PAGE 1
Intel® Solid-State Drive 310 Series SSDMAEMC040G2XX, SSDMAEMC080G2XX Product Specification       Capacity: 40 GB, 80 GB Components: Intel® 34nm NAND Flash Memory Multi-Level Cell (MLC) Read and Write IOPS (Iometer* Queue Depth 32) — 40 GB Random 4 KB reads: Up to 25 K IOPS Random 4 KB writes: Up to 2.5 K IOPS — 80 GB Random 4 KB reads: Up to 35 K IOPS Random 4 KB writes: Up to 6.
PAGE 2
Ordering Information L Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
PAGE 3
Intel® Solid-State Drive 310 Series Contents 1.0 Overview ................................................................................................................... 5 2.0 Architecture .............................................................................................................. 6 3.0 Product Specifications ............................................................................................... 7 3.1 Capacity ..............................................................
PAGE 4
Intel® Solid-State Drive 310 Series Intel® Solid-State Drive 310 Series Product Specification 4 February 2011 Order Number: 324042-007US
PAGE 5
Intel® Solid-State Drive 310 Series 1.0 Overview This document describes the specifications and capabilities of the Intel® Solid-State Drive 310 Series (Intel® SSD 310 Series). The Intel SSD 310 Series delivers compact storage and optimized performance for traditional and innovative small-form-factor and embedded platforms in two capacity sizes: 40 GB and 80 GB.
PAGE 6
Intel® Solid-State Drive 310 Series 2.0 Architecture The Intel SSD 310 Series is electrically and software-compatible with existing full-sized mSATA interfaces. The Intel SSD 310 Series utilizes a cost-effective, high-performance Intel SATA-toNAND controller to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple NAND flash memory devices on multiple channels. Figure 1.
PAGE 7
Intel® Solid-State Drive 310 Series 3.0 Product Specifications This section provides details on the Intel SSD 310 Series product specifications. 3.1 Capacity Table 1. User Addressable Sectors Unformatted Capacity Total User Addressable Sectors in LBA Mode 40 GB 80 GB 78,165,360 156,301,488 Notes: LBA count shown represents total user storage capacity and will remain the same throughout the life of the drive.
PAGE 8
Intel® Solid-State Drive 310 Series 3.3 Electrical Table 3. Operating Voltage and Power Consumption Electrical Characteristics Operating Voltage for 3.3 V (+/- 5%) Min Max Power Consumption (Typical) Active1 Idle2 40 GB 80 GB 3.14 V 3.47 V 150 mW 75 mW Notes: 1. Active power measured during execution of MobileMark* 2007 with DIPM (Device Initiated Power Management) enabled. 2. Idle power defined as SSD at idle with DIPM enabled. 3.4 Environmental Conditions Table 4.
PAGE 9
Intel® Solid-State Drive 310 Series 3.5 Product Regulatory Compliance The Intel SSD 310 Series meets or exceeds the regulatory or certification requirements in Table 5. Table 5. Product Regulatory Compliance Specifications Description Region for which conformity declared European Union Low Voltage Directive (LVD) 2006/95/EC EN 60950-1 2nd edition for Information Technology Equipment Safety - Part 1: General Requirements European Union UL/CSA 60950-1, Second Edition CAN/CSA-C22.2 No.
PAGE 10
Intel® Solid-State Drive 310 Series 3.6 Reliability Table 6. Reliability Specifications Parameter Uncorrectable Bit Error Rate (UBER) Value 1 sector in 1016 bits read, max Unrecoverable read bit error rate will not exceed one sector in the specified number of bits read. In the extremely unlikely event of a nonrecoverable read error, the SSD will report it as a read failure to the host; the sector in error is considered corrupt and is not returned to the host.
PAGE 11
Intel® Solid-State Drive 310 Series 4.0 Mechanical Information Figure 2 shows the physical dimension of the Intel SSD 310 Series. All dimensions are in millimeters. Figure 2.
PAGE 12
Intel® Solid-State Drive 310 Series 5.0 Pin and Signal Descriptions 5.1 Pin Locations Figure 3. Signal and Power Segment Pins 5.2 Signal Descriptions Table 7. Connector Pin Signal Definitions Pin Function Definition P1 Reserved No Connect P2 +3.3 V 3.3 V Source P3 Reserved No Connect P4 GND Return Current Path P5 Reserved No Connect P61 +1.5 V 1.
PAGE 13
Intel® Solid-State Drive 310 Series Table 7. Connector Pin Signal Definitions (Continued) Pin Function Definition P18 GND Return Current Path P19 Reserved No Connect P20 Reserved No Connect P21 GND Return Current Path P22 Reserved No Connect P23 +B Host Receiver Differential Signal Pair This is an output of the SSD. P24 +3.3 V 3.3 V Source P25 -B Host Receiver Differential Signal Pair This is an output of the SSD.
PAGE 14
Intel® Solid-State Drive 310 Series 6.0 Supported Command Sets The Intel SSD 310 Series supports ATA (Advanced Technology Attachment) commands described in this section. 6.
PAGE 15
Intel® Solid-State Drive 310 Series 6.3 Security Mode Feature Set The Intel SSD 310 Series supports the Security Mode command set, which consists of: • SECURITY SET PASSWORD • SECURITY UNLOCK • SECURITY ERASE PREPARE • SECURITY ERASE UNIT • SECURITY FREEZE LOCK • SECURITY DISABLE PASSWORD 6.
PAGE 16
Intel® Solid-State Drive 310 Series 6.7 48-Bit Address Command Set The Intel SSD 310 Series supports the 48-bit Address command set, which consists of: • FLUSH CACHE EXT • READ DMA EXT • READ NATIVE MAX ADDRESS EXT • READ SECTOR(S) EXT • READ VERIFY SECTOR(S) EXT • SET MAX ADDRESS EXT • WRITE DMA EXT • WRITE MULTIPLE EXT • WRITE SECTOR(S) EXT • WRITE UNCORRECTABLE EXT 6.
PAGE 17
Intel® Solid-State Drive 310 Series 7.0 Certifications and Declarations Table 8 describes the Device Certifications supported by the Intel SSD 310 Series. Table 8. Device Certifications and Declarations Certification Description CE Compliant Indicates conformity with the essential health and safety requirements set out in European Directives Low Voltage Directive and EMC Directive. UL Certified Underwriters Laboratories, Inc. Component Recognition UL60950-1.
PAGE 18
Intel® Solid-State Drive 310 Series 9.0 Additional Product Information For additional information about the Intel SSD 310 Series, see the documentation in Table 10. Table 10. Related Documentation Order Number 322737 10.0 Title Intel® High Performance SATA Solid State Drive S.M.A.R.T. Features – 34nm Product Line User Guide Terms and Acronyms Table 11 defines the terms and acronyms used in this document. Table 11.
PAGE 19
Intel® Solid-State Drive 310 Series Table 11. Glossary of Terms and Acronyms (Continued) Term Definition RMS Root Mean Square RoHS Restriction of Hazardous Substances SATA Serial Advanced Technology Attachment SMART Self-Monitoring, Analysis and Reporting Technology An open standard for developing hard drives and software systems that automatically monitors the health of a drive and reports potential problems.
PAGE 20
Intel® Solid-State Drive 310 Series Appendix A IDENTIFY DEVICE Command Data Table 12 details the sector data returned after issuing an IDENTIFY DEVICE command. Table 12.
PAGE 21
Intel® Solid-State Drive 310 Series Table 12.
PAGE 22
Intel® Solid-State Drive 310 Series Table 12.