Datasheet

Intel
®
Solid-State Drive DC P3600 Series
October 2014 Product Specification
330569-004US 27
Table 19: Additional SMART Attributes (Log Identifier CAh)
Byte
# of Bytes
Attribute
Description
0
1
AB (Program Fail Count)
Raw value: shows total count of
program fails.
Normalized value: beginning at 100,
shows the percent remaining of
allowable program fails.
3
1
Normalized Value
5
6
Current Raw Value
12
1
AC (Erase Fail Count)
Raw value: shows total count of erase
fails.
Normalized value: beginning at 100,
shows the percent remaining of
allowable erase fails.
15
1
Normalized Value
17
6
Current Raw Value
24
1
AD (Wear Leveling Count)
Raw value:
Bytes 1-0: Min. erase cycle
Bytes 3-2: Max. erase cycle
Bytes 5-4: Avg. erase cycles
Normalized value: decrements from
100 to 0.
27
1
Normalized Value
29
6
Current Raw Value
36
1
B8 (End to End Error Detection Count)
Raw value: reports number of End-to-
End detected and corrected errors by
hardware.
Normalized value: always 100.
39
1
Normalized Value
41
6
Current Raw Value
48
1
C7 (CRC Error Count)
Raw value: shows total number of
encountered SATA interface cyclic
redundancy check (CRC) errors.
Normalized value: always 100.
51
1
Normalized Value
53
6
Current Raw Value
60
1
E2 (Timed Workload, Media Wear)
Raw value: measures the wear seen by
the SSD (since reset of the workload
timer, attribute E4h), as a percentage of
the maximum rated cycles. Divide the
raw value by 1024 to derive the
percentage with 3 decimal points.
Normalized value: always 100.
63
1
Normalized Value
65
6
Current Raw Value
72
1
E3 (Timed Workload, Host Reads %)
Raw value: shows the percentage of I/O
operations that are read operations
(since reset of the workload timer,
attribute E4h). Reported as integer
percentage from 0 to 100.
Normalized value: always 100.
75
1
Normalized Value
77
6
Current Raw Value
84
1
E4 (Timed Workload, Timer)
Raw value: measures the elapsed time
(number of minutes since starting this
workload timer).
Normalized value: always 100.
87
1
Normalized Value
89
6
Current Raw Value
96
1
EA (Thermal Throttle Status)
Raw value: reports Percent Throttle
Status and Count of
events
Byte 0: Throttle status reported as
integer percentage.
Bytes 1-4: Throttling event count.
Number of times thermal throttle has
activated. Preserved over power cycles.
Byte 5: Reserved.
Normalized value: always 100.
99
1
Normalized Value
101
6
Current Raw Value