Datasheet

Intel® Solid-State Drive DC S3500
April 2013 Product Specification
Order Number: 328860-001US 21
Table 18. SMART Attributes
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
E2h
Timed Workload Media Wear
Raw value: measures the wear seen by the SSD (since
reset of the workload timer, attribute E4h), as a
percentage of the maximum rated cycles. Divide the raw
value by 1024 to derive the percentage with 3 decimal
points.
Normalized value: always 100.
1
1
0
0
1
0
0 (none)
E3h
Timed Workload Host Read/Write Ratio
Raw value: shows the percentage of I/O operations that
are read operations (since reset of the workload timer,
attribute E4h). Reported as integer percentage from 0 to
100.
Normalized value: always 100.
1
1
0
0
1
0
0 (none)
E4h
Timed Workload Timer
Raw value: measures the elapsed time (number of
minutes since starting this workload timer).
Normalized value: always 100.
1
1
0
0
1
0
0 (none)
E8h
Available Reserved Space
Raw value: reports number of reserve blocks remaining.
Normalized value: begins at 100 , which corresponds to
100 percent availability of the reserved space. The
threshold value for this attribute is 10 percent availability.
1
1
0
0
1
1
10
E9h
Media Wearout Indicator
Raw value: always 0.
Normalized value: reports the number of cycles the NAND
media has undergone. Declines linearly from 100 to 1 as the
average erase cycle count increases from 0 to the
maximum rated cycles.
Once the normalized value reaches 1, the number will not
decrease, although it is likely that significant additional
wear can be put on the device.
1
1
0
0
1
0
0 (none)
EAh
Thermal Throttle Status
Raw value: reports Percent Throttle Status and Count of
events
Byte 0: Throttle status reported as integer percentage.
Bytes 1-4: Throttling event count. Number of times
thermal throttle has activated. Preserved over power cy-
cles.
Byte 5: Reserved.
Normalized value: always 100.
1
1
0
0
1
0
0 (none)
F1h
Total LBAs Written
Raw value: reports the total number of sectors written by
the host system. The raw value is increased by 1 for every
65,536 sectors (32MB) written by the host.
Normalized value: always 100.
1
1
0
0
1
0
0 (none)
F2h
Total LBAs Read
Raw value: reports the total number of sectors read by the
host system. The raw value is increased by 1 for every
65,536 sectors (32MB) read by the host.
Normalized value: always 100.
1
1
0
0
1
0
0 (none)