Intel® Solid-State Drive 730 Series Intel® Solid-State Drive 730 Series Product Specification Capacities: 240GB, 480GB Compatibility Components: Intel® SSD Toolbox with Intel® SSD Optimizer Intel® 20nm NAND Flash Memory Intel® Data Migration Software Multi-Level Cell (MLC) Intel® Rapid Storage Technology SATA Revision 3.0 ACS-2 (ATA/ATAPI Command Set 2) SSD Enhanced SMART ATA feature set Form Factors: 2.
Intel® Solid-State Drive 730 Series Ordering Information Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Intel® Solid-State Drive 730 Series Contents Revision History ............................................................................................................................................................................ 5 Terms and Acronyms ...................................................................................................................................................................................................5 1 Introduction ..........................................
Intel® Solid-State Drive 730 Series Tables Table 1: Table 2: Table 3: Table 4: Table 5: Table 6: Table 7: Table 8: Table 9: Table 10: Table 11: Table 12: Table 13: Table 14: Table 15: Standard References ........................................................................................................................................................................7 User Addressable Sectors ...............................................................................................................
Intel® Solid-State Drive 730 Series Revision History Revision Number Description 001 Initial release 002 Page 1, note 3 updated 003 Added AES 256-bit encryption feature, document number correction and format updates Revision Date February 2014 March 2014 December 2014 Terms and Acronyms Term Description ATA Advanced Technology Attachment DAS Device Activity Signal DMA Direct Memory Access EXT Extended FPDMA First Party Direct Memory Access GB Gigabyte (1,000,000,000 bytes) Note:
Intel® Solid-State Drive 730 Series 1 Introduction This document describes the specifications and capabilities of the Intel® Solid-State Drive 730 Series (Intel SSD 730 Series). The Intel SSD 730 Series is a standard 2.5-inch form factor solid-state drive delivering leading performance for Serial Advanced Technology Attachment (SATA)-based desktop and workstation computers in 240GB and 480GB capacities.
Intel® Solid-State Drive 730 Series 1.1 Table 1: Reference Documents Standard References Title Date or Rev. # Location May 2005 SFF-8201, 2.5-inch drive form factor http://www.sffcommittee.org/ May 2006 SFF-8223, 2.5-inch Drive w/Serial Attachment Connector http://www.sffcommittee.org/ Sept 2008 IEC* 55022 Information Technology Equipment — Radio disturbance Characteristics— Limits and methods of measurement CISPR22:2008 (Modified) http://www.iec.ch/ Dec 2008 VCCI http://www.vcci.
Intel® Solid-State Drive 730 Series 2 Product Specifications 2.1 Capacity Table 2: User Addressable Sectors Intel® SSD 730 Series Unformatted Capacity (Total User Addressable Sectors in LBA mode) 240GB 468,862,128 480GB 937,703,088 2.
Intel® Solid-State Drive 730 Series Electrical Characteristics1 2.3 Table 5: Operating Voltage and Power Consumption Values (5V / 12V) Electrical Characteristics 240GB 480GB Operating Voltage for 5V (±5%) Min. Max. Rise Time (Max./Min.) Fall Time (Max./Min.) Noise Tolerance Min. Off Time2 4.75V 5.25V 1 sec / 1 ms 1 ms 50 mV pp (100 KHz – 20 MHz) 500 ms Operating Voltage for 12V (±10%) Min. Max. Rise Time (Max./Min.) Fall Time (Max./Min.) Noise Tolerance Min. Off Time2 10.8V 13.
Intel® Solid-State Drive 730 Series 2.4 Environmental Conditions 2.4.1 Temperature, Shock, Vibration Table 6: Temperature, Shock, Vibration Electrical Characteristics Range Case Temperature Operating Non-operating1 0º C - 70º C -55º C - 95º C Temperature Gradient2 Operating Non-operating 30 (TYP)º C/hr 30 (TYP)º C/hr Humidity Operating Non-operating 5 – 95% 5 – 95% Shock and Vibration Range 3 Shock Operating Non-operating 1,000G (Max) at 0.5 msec 1,000G (Max) at 0.
Intel® Solid-State Drive 730 Series 2.5 Product Regulatory Compliance The Intel® SSD 730 Series meets or exceeds the regulatory or certification requirements in Table 7.
Intel® Solid-State Drive 730 Series 2.6 Reliability The Intel® SSD 730 Series meets or exceeds SSD endurance and data retention requirements as specified in the JESD218* specification. Table 8: Reliability Specifications Parameter Value Uncorrectable Bit Error Rate (UBER) Uncorrectable bit error rate will not exceed one sector in the specified number of bits read.
Intel® Solid-State Drive 730 Series 3 Mechanical Information Figure 3-1 shows the mechanical information for the 2.5 inch Intel® SSD 730 Series. All dimensions are in millimeters. Figure 3-1: Dimensions for Full Size 2.
Intel® Solid-State Drive 730 Series 4 Pin and Signal Descriptions 4.1 Pin Locations Figure 4-1: Layout of Signal and Power Segment Pins Note: 2.5-inch connector supports in-built latching capability. 4.2 Signal Descriptions 4.2.
Intel® Solid-State Drive 730 Series 4.2.2 Power Pin Signal Definitions Table 10: Serial ATA Power Pin Definitions Pin1 Name Definition Mating Order P12 V33 3.3V Power; not used 2nd Mate P22 V33 3.3V Power; not used 2nd Mate P32 V33 3.
Intel® Solid-State Drive 730 Series 5 Supported Command Sets The Intel® SSD 730 Series supports mandatory Advanced Technology Attachment (ATA*) and Serial ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and optional commands are defined in this section. 5.
Intel® Solid-State Drive 730 Series 5.2 Power Management The Intel® SSD 730 Series supports several power management feature sets as defined by the ATA specification: general Power Management feature set, Advanced Power Management feature set, and Power-Up in Standby (PUIS) feature set. The Advanced Power Management and PUIS features can be enabled or disabled using the SET FEATURES command.
Intel® Solid-State Drive 730 Series 5.3.1 SMART Attributes Table 11 lists the SMART attributes supported by the Intel® SSD 730 Series; Table 12 lists the corresponding status flags and threshold settings. Table 11: SMART Attributes Status Flags ID Attribute Threshold SP EC ER PE OC PW 05h Re-allocated Sector Count The raw value of this attribute reports the number of retired blocks since leaving the factory (grown defect count).
Intel® Solid-State Drive 730 Series Status Flags ID Attribute C0h Power-Off Retract Count (Unsafe Shutdown Count) The raw value of this attribute reports the cumulative number of unsafe (unclean) shutdown events over the life of the device. An unsafe shutdown occurs whenever the device is powered off without STANDBY IMMEDIATE being the last command. C5h Pending Sector Count The raw value of this attribute reports the number of current unrecoverable read errors that will be reallocated on next write.
Intel® Solid-State Drive 730 Series Table 12: SMART Attribute Status Flags Status Flag Description Value = 0 Value = 1 SP Self-preserving attribute Not a self-preserving attribute Self-preserving attribute EC Event count attribute Not an event count attribute Event count attribute ER Error rate attribute Not an error rate attribute Error rate attribute PE Performance attribute Not a performance attribute Performance attribute OC Online collection attribute Collected only during offl
Intel® Solid-State Drive 730 Series 5.4 Device Statistics In addition to the SMART attribute structure, statistics pertaining to the operation and health of the Intel® SSD 730 Series can be reported to the host on request through the Device Statistics log as defined in the ATA specification. The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is accessible using READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
Intel® Solid-State Drive 730 Series 5.7 Host Protected Area Command Set The Intel® SSD 730 Series supports the Host Protected Area Management command set which consists of: READ NATIVE MAX ADDRESS SET MAX ADDRESS READ NATIVE MAX ADDRESS EXT SET MAX ADDRESS EXT 5.
Intel® Solid-State Drive 730 Series 6 Certifications and Declarations The following table describes the Device Certifications supported by the Intel® SSD 730 Series. Table 14: Device Certifications and Declarations Certification CE* Compliant UL* Certified Description European Economic Area (EEA): Compliance with the essential requirements of EC Council Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive 2004/108/EC and Directive 2011/65/EU. Certified Underwriters Laboratories, Inc.
Intel® Solid-State Drive 730 Series 7 Appendix The following table describes the sector data returned from an Identify Device command.
Intel® Solid-State Drive 730 Series Word F = Fixed V = Variable X = Both Default Value Description 59 F B101h Number of sectors transferred per interrupt on multiple commands 60-62 V varies Total number of user-addressable sectors 63 X 0007h Multi-word DMA modes supported/selected 64 F 0003h PIO modes supported 65 F 0078h Minimum multiword DMA transfer cycle time per word 66 F 0078h Manufacturer’s recommended multiword DMA transfer cycle time 67 F 0078h Minimum PIO transfer c
Intel® Solid-State Drive 730 Series Word F = Fixed V = Variable X = Both Default Value Description 92 V 0FFEh Master Password Revision Code 93 X 0h Hardware reset result: the contents of bits (12:0) of this word shall change only during the execution of a hardware reset 94 V 0h Vendor’s recommended and actual acoustic management value 95 F 0h Stream minimum request size 96 V 0h Streaming transfer time - DMA 97 V 0h Streaming access latency - DMA and PIO 98-99 F 0h Streaming p
Intel® Solid-State Drive 730 Series Word F = Fixed V = Variable X = Both Default Value Description 176-205 V Varies Current media serial number 206 X 003Dh SCT Command Transport 207-208 F 0h Reserved 209 X 4000h Alignment of logical blocks within a physical block 210-211 V 0h Write-Read-Verify Sector Count Mode 3 (DWord) 212-213 F 0h Write-Read-Verify Sector Count Mode 2 (DWord) 214 X 0h NV Cache Capabilities 215-216 V 0h NV Cache Size in Logical Blocks (DWord) 217 F 0