Voltage Regulator Module (VRM) and Enterprise Voltage Regulator-Down (EVRD) 10.0 Design Guidelines

VRM and EVRD 10.0 Design Guidelines
R
29
Table 10. VRM 10.0 Connector Pin Descriptions
Name Type Description
Load_current Output Analog signal representing the output load current.
OUTEN Input Output Enable.
Vcc_PWRGD Output Output signal indicating that the output voltage of the VRM is in the
specified range.
VID[5:0] Input Voltage ID pins used to specify the VRM output voltage.
VIN+ Power VRM Input Voltage.
VIN− Ground VRM Input Ground.
VO+ Power VRM Output Voltage.
VO− Ground VRM Output Ground.
VO_SEN+
VO_SEN–
Input Output voltage sense pins.
VR_hot# Output Indicates to the system that a thermal event has been detected in the VR
VRM_pres# Output Indicates to the system that a VRM is plugged into the socket.
VRM_ID0 Input VRM Identification bit 0
VRM_ID1 Input VRM Identification bit 1
Reserved Reserved Do not use if planning to use VRM10.1 modules with this connector.
Unspecified Unspecified Pins available for use by vendors or customers.