User's Manual

Intelibs, Inc. Proprietary and Confidential Page 34
34
 Digital Filter monitoring and control item of each band
 Filter Enable: Digital filter Enable set
 PLL: FPGA PLL lock alarm
 Module ID: Digital filter ID information of FPGA.
 FPGA Ver.: FPGA SW version
 Isolation: Isolation margin between two antennas
 IGC LVL: Isolation gain control target margin level set and
IGC protection function On / Off
 IGC ATT: applied attenuation value by IGC function
 IGC Delay: Delay set for IGC function
 Filter Info: Digital filter setting information
 IGC MODE: IGC control Tx only or Tx/Rx simultaneously
 DL Input/Output level indicator of Digital Filter
 IN PWR: DL input level at digital filter input port
 OUT PWR: DL output level at digital filter output port
 UL Input/Output level indicator of Digital Filter
 IN PWR: UL input level at digital filter input port
 OUT PWR: UL output level at digital filter output port
 Optic parts monitoring and control item of RHU
 LD0: Transmitting LD power level value from Optic1 port
 LPWR: Lower alarm limit value of LD0 power level and
lower alarm status of LD0
 LD1: Transmitting LD power level value from Optic2 port
 LPWR: Lower alarm limit value of LD1 power level and
lower alarm status of LD1
 PD0: Receiving PD power level value from Optic1 port
 LPWR: Lower alarm limit value of PD0 power level and
lower alarm status of PD0
 PD1: Receiving PD power level value from Optic2 port
 LPWR: Lower alarm limit value of PD1 power level and
lower alarm status of PD1