User Manual

IntelixAVO‐USB‐H
InstallationManual



Introduction
Whenused with a compatible transmitter, the Intelix AVO‐USB‐H extendertransmits low
and full speed USB signals over twisted pair cabling. Theunit extends low speed USB 1.0
and 2.0 signals up to 330 feet, and full speed USB 1.0 and 2.0 signals up to 100 feet.
Convenient connector
 dongles allow direct connection to the host and client devices,
facilitatingaclean,low‐profileinstallation.

TheIntelixAVO‐USBisplug‐and‐playanddoesnotrequiredriversoftware.


Pre‐Installation
The AVO‐USB features shielded RJ45 connectors, which are provided as an option in 
harshelectricalenvironments, suchasinstallationswithlarge motorsorcablerunsnear
sources of interference. In such environments, shielded twisted pair cable (STP) may
provideadditionalnoiseimmunity.WhenusingSTP,ensuretheshieldon
bothendsofthe
cablerunisterminatedtoashieldedRJ45connector.



Caution: Do not attempt to disassemble or alter the extender housing.
There are no user-serviceable parts inside the unit. Doing so will void your
warranty.