User guide

11675 Ridgeline Dr
Colorado Springs, CO 80921
Phone: [phone]
Toll-Free: 800-530-8998
Fax: [phone]
DL-DA12 Installaon Guide
Instrucons:
1. Connect the source device to the HDMI input using an HDMI cable that is less than or equal to 5 meters in length. If the
source device that is further away, it is highly recommended to install a Digitalinx DL-HD70 or DL-HDE100.
2. Connect the display devices to HDMI outputs using HDMI cables that are less than or equal to 5 meters in length. For
display devices that are further away, it is highly recommended to install a Digitalinx DL-HD70 or DL-HDE100.
3. Plug the power supply into the power input port on the rear of the distribuon amplier. Twist the collar of the power
plug in a clockwise direcon to secure the connecon.
DL-DA12 Installaon Guide
HDMI Distribuon Amplier
Rev 140624
The Digitalinx DL-DA12 is a one input to two output HDMI distribuon amplier (DA). The DL-DA12 supports supports 3D
and 4K video resoluons as well as mulchannel audio formats. The EDID sengs of the display on Output 1 are used to
negoate with the source device.