Printer User Manual

9. Accessories

1) Paper: 57.5mm+/-0.5mm(width) , 60mm max(roll diameter) , 85 microns

(thickness)

PP-225-80 1-ply paper roll

PP-225-75W C 2-ply paper roll

2) Ribbon specification : ERC-09 P (Purple) or B (Black) Standard

cartridge

ERC-22 P (Purple) or B (Black) Long Life Cartridge

3) Interface Cable: 6 foot long, shielded cable with molded connectors.

CBL-625M-25F-STR Parallel cable

CBL-625F-25M Serial cable w/ DB-25F host

side

CBL-69F-25M Serial cable w/ DB-9F host side

4)Power Supply: Output: 9VDC 1.5A , 2.1mm x 5.5mm female plug , center

positive.

OMPS190-915-NA 120VAC input

OMPS190-915-EU 220-240VAC input

OMPS190-915-SMPS 90-240VAC input

10. Troubleshooting

1) IF THE POWER LED DOES NOT COME ON.

Make sure the power supply cables are securely plugged into the printer, the

adapter, and the power outlet. Also, make sure that power is supplied to the

power outlet. If the outlet is controlled by a switch or timer, use another outlet.

1)IF THE POWER LED IS ON BUT PAPER DOES NOT FEED.

This may be a head jam condition, first turn off the printer and make sure there

is no paper stuck in the mechanism; however do not use force or a sharp object

to remove the jammed paper.

2)IF THE PAPER IS NOT FEEDING PROPERLY.

If the printout looks squashed, make sure that the paper roll moves freely on the

paper holder. If the paper is wrinkled on the edges, the roll may not loaded

correctly. In that case remove the p aper and reload.

4) IF THE PRINTER SOUNDS LIKE IT IS P RINTING BUT NOTHING IS