User guide
18
The TILT funcon phase modulates oscillator 1 with its own output. This results in a self-feedback loop which
has the eect of ‘lng’ the waveform, as shown in the diagram below. The amount of feedback, and hence
the amount of lng, is set by the TILT parameter. At large values of the TILT parameter the waveform may
start to become distorted, and even chaoc.
To set the nominal value of the TILT parameter, press the TILT/DRIVE buon. The TILT parameter value can then
be adjusted with the rotary encoder and will be shown in the boom row of the LCD display.
The TILT parameter can also be modulated by the MOD B input, which is acvated with a second press of the
TILT/DRIVE buon. When MOD B modulaon is acve the lower row of the LCD display will change to show
both the nominal seng and the oset provided by the MOD B modulaon.
TILT FUNCTION
TILT = 00
TILT = 07
TILT = 12
TILT = 25
SINE FLUTE1 GAP SAW