Instruction Manual

Intellijel Designs Inc Mutamix Manual v0.1 Draft
Page 4 of 8
Here is the full menu tree of MAIN mode. X-MODE is covered on the next page. Each of the Red boxes are controlled via the MUTE CTRL
inputs. You will notice the GATE and TOGGLE have a drastic effect on the mute behavior if you control them with several tracks of a
sequencer with variable gate length. Notice that double click always leaves a menu, except when at the top level when it enters SOLO.
1
Mute
Channel 1
Press and
Hold for 1
second
Press and
Release
Enter
X-Mode
2
Mute
Channel 2
Press and
Release
X-MODE SAVE
Press and
Hold for 1
second
Enter
SAVE Mode
Press and Hold
until Green LED
flashes
Save Current
State to
EEPROM, Sets
startup settings
Double Click
Any
Button
Exit
SAVE Mode,
Back to top menu
Press a button to
SAVE Settings to
that preset
number.
MAIN Mode
top menu
X-mode LED is off
Double
Click to
SOLO
Double Click
to SOLO
Solid LED shows used memory
Flashing LED shows last saved
654321
3
Mute
Channel 3
Press and
Release
Press and
Hold for 1
second
Enter
LOAD Mode
Double Click
Any
Button
Exit
LOAD Mode,
Back to top menu
Press a button to
LOAD Settings
from that preset
number.
Double
Click to
SOLO
Solid LED shows used memory
Flashing LED shows last loaded
654321
4
Mute
Channel 4
Press and
Release
Press and
Hold for 1
second
Enter
KILL Mode
Double Click
Any
Button
Exit
KILL Mode,
Back to top menu
Press any
button
Double
Click to
SOLO
All LED flash
All Channels are muted
654321
5
Mute
Channel 5
Press and
Release
Press and
Hold for 1
second
Enter
GATE Mode
Double Click
Any
Button
Exit
GATE Mode,
Back to top menu
Press a
button to
Change
setting
Double
Click to
SOLO
Solid LEDs show channels that are
in GATE mode
654321
6
Mute
Channel 6
Press and
Release
Press and
Hold for 1
second
Enter
TOGGLE
Mode
Double Click
Any
Button
Exit
TOGGLE Mode,
Back to top menu
Press a
button to
Change
setting
Double
Click to
SOLO
Solid LEDs show channels that are
in TOGGLE mode
654321
LOAD
KILL GATE TOGGLE
Intellijel Mutamix - Menu Tree Part 1 of 2
Press and Hold
until Green LED
flashes
Load saved
State from
EEPROM,
erases current
settings
Double Click
Any
Button
Exit
SOLO Mode,
Back to top menu
Press a button to
add or subtract
from SOLO group
Flashing LED shows channels
selected to SOLO
654321