User Manual

[8] SAVE button
When in Edit mode, press this button to enable Preset saving. Steppy can store up to 8
presets (assigned to each of the 8 buttons in the top row of multifunction buttons). A preset
contains the settings assigned to all 4 tracks, plus the patterns within those tracks (as shown
in Steppy Architecture , later in this manual).
To save a preset:
1. Press the red EDIT button to enter Edit mode.
2. Press the SAVE button.
The SAVE button glows red and the top row of buttons lights, displaying the status of the
eight presets:
● Lit Preset button: a preset already exists on that button.
● Unlit Preset button: there is no preset assigned to that button.
● Rapidly Flashing Preset button: indicates the currently active preset.
3. Press one of the 8 buttons in the top row to save the preset to that location.
4. All buttons will flash quickly to indicate that the preset has been saved.
Steppy 1U Manual 27