User Manual
Connecting Two Stereo Line In 1U Modules to a 7UCase
You can connect a second Stereo Line In 1U module to
the other 6-pin connector on the Audio Jacks board,
giving you four audio inputs in a 7U case.
1. Using the ribbon cable supplied with the Stereo Line
In 1U module, connect it to one of the two keyed
6-pin connectors on the 2nd generation Audio Jacks
Board .
2. Connect the other Stereo Line In 1U module to the
remaining keyed 6-pin connector on the Audio Jacks
Board .
The input for each Stereo Line In 1U module appears
at the corresponding set of ¼” jacks on the Audio
Jacks Board .
Connecting Both a Stereo Line In 1U and a Stereo Line Out 1U to a 7UCase
You can connect both a Stereo Line In 1U and a Stereo
Line Out 1U module to the Audio Jacks board, giving you
two inputs and two outputs on a 7U case.
1. As discussed previously, connect the Stereo Line In
1U module to one of the two keyed 6-pin connectors
on the 2nd generation Audio Jacks Board .
2. Using the ribbon cable supplied with the Stereo Line
Out 1U module, connect it to the other keyed 6-pin
connector on the 2nd generation Audio Jacks Board .
Two of the 7U case’s ¼” inputs will then feed the
Stereo Line In 1U module, and the other two will
serve as outputs for the Stereo Line Out 1U module.
Stereo Line In 1U System Manual 9