User Manual

SYSTEM OVERVIEW 
Use the Stereo Line In 1U system to bring external audio into your modular system for processing.
The system works with balanced +4 dBu professional audio products and with -10dbV unbalanced
gear.
The Stereo Line In 1U system comprises two components:
[1] The Stereo Line In 1U module:
[2] Either a Stereo In Jacks 1U module, or a case with built-in ¼” audio jacks, such as Intellijel’s
Palette or 7U cases (with a 2nd generation Audio Jacks board ):
Stereo Line In 1U System Manual 3
A ribbon cable connects this module to either the Stereo In
Jacks 1U module, or to a compatible Intellijel case with
built-in ¼” jacks. It has independent gain controls for the left
and right channels, along with signal level LEDs. It contains
all the gain control circuitry to drive a eurorack system at
the proper levels, and features two ⅛” output jacks for
patching your external signal into other eurorack modules.
Stereo In Jacks 1U Module
If you don’t own an Intellijel case with built-in compatible
¼” jacks, then you need to purchase a Stereo In Jacks
1U module, which connects via ribbon cable to the Stereo
Line In 1U module to provide the ¼” TRS input jacks
necessary for connecting external audio sources.
Palette Case
If you own an Intellijel Palette case, you can connect the
Stereo Line In 1U module directly to one of its built-in
pairs of ¼” jacks, rather than purchasing a Stereo In
Jacks 1U .
7U Case w/ 2nd Generation Audio Jacks Board
If you own an Intellijel 7U case with a 2nd generation
Audio Jacks Board (distinguished by the row of shrouded
headers along its bottom edge), you can use its jacks
rather than purchasing a Stereo In Jacks 1U module.
If your 7U case has a 1st generation Audio Jacks
Board , you can purchase a 2nd generation board to
replace your old board.