User Manual

Connecting a Stereo Line In 1U to a Stereo In Jacks 1U 
The Stereo Line In 1U module ships with a ribbon cable for connecting to a pair of ¼” TRS audio
jacks — either those built-in to the 2nd generation Audio Jacks Board installed in Intellijel 7U cases ;
an Intellijel Palette case, or those contained within the separately available Stereo In Jacks 1U
module.
To connect the Stereo Line In 1U module to the Stereo In Jacks 1U module:
1. Connect one end of the supplied ribbon cable to the keyed 6-pin connector on the Stereo Line
In 1U module and the other end to the keyed 6-pin connector on the Stereo In Jacks 1U .
The signal arriving at the Stereo In Jacks’ ¼” TRS jacks is transferred into the Stereo Line In 1U
module for patching into your eurorack system at the correct voltage levels.
 
Stereo Line In 1U System Manual 7