Copyright © 2006 Netropa Corp. || http://www.intellinav.com Intellinav One All rights reserved.
Table of Contents 1 Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Managing Your Favorites List . . . . . . . . . . . . . . . . . . .23 Setting Your Options . . . . . . . . . . . . . . . . . . . . . . . . .24 Display Options . . . . . . . . . . . . . . . . . . . . . . . . . .24 Route Options . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Speed Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Localization . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started Congratulations on your purchase of the Intellinav system. Your Intellinav system can guide you to the destination of your choice using signals from Global Positioning Satellites (GPS) orbiting the earth. SD Card Slot Power Button Intellinav One User’s Manual There are 24 GPS satellites orbiting the earth. A GPS device can calculate your position on the earth if it can receive signals from at least three of these satellites.
Starting Intellinav Mounting the Intellinav System Mounting the Suction Cup 1. Press the suction cup firmly against the windshield. Press the POWER button. The Intellinav screen appears. first GPS fix is obtained, thereafter, it should normally take no more than 30 seconds to 1 minute to obtain a valid GPS fix. Tap Navigate. A warning screen appears. Car Cursor 2. Press down the lever to fix the suction cup in place. 4. Adjust the angles of the arms to achieve the best viewing position.
Working with the Map Entering Data on the Intellinav System Moving Through the Screens The Intellinav system doesn't have a keyboard. Instead, you tap the screen to enter data. When you are entering data, a screen containing the Letters of the alphabet appears: The Intellinav system shows you one screen at a time. Each time you tap a button, a new screen appears.
Location Information If you have set a destination, you can view a list of the maneuvers that make up your route. You can find location information about any point on the map by pressing firmly on the map for one second. A screen appears giving you the opportunity to set the location as the Start or the Destination, and save the location to your Favorites list, or view information. To view the route list: manual).
Planning Your Route You can set a destination with the Intellinav system many different ways. Once you have set a destination, you can add a detour or a stopover. Setting a Single Destination You can set your destination the following ways: Address Intersection Point of Interest (POI) Favorites Recent City Center When you have found your destination, you have several options: Nav Fav Show 2. Tap Destination. The Set Destination screen appears. Fav adds the destination to your Favorites list.
OK when you have selected the City. The Enter Street Name screen appears. 3. Tap Intersection. The Input Method screen appears. 8. Select the intersection that matches the location you want to go to and tap Nav. The map appears, and the guidance directions begin. To enter an intersection as a destination using City First: 4. If you need to change the region or State: 8. Tap the Numbers or Letters A-D to enter the house number. Tap OK. The Select Address screen appears. 9.
Using a Point of Interest (POI) as a Destination The four methods of selecting a specific point of interest include two for nearby POIs and two for all POIs in a region. To select a nearby POI as a destination: 1. Tap Menu. The main menu appears. 2. Tap Destination. The Set Destination screen appears. 3. Tap POI. The Points of Interest screen appears. 15 To select from all POIs in a region: 1. Tap Menu. The main menu appears. NOTE: If you choose Restaurant, tap the letters to enter a type of restaurant.
3. Tap Nav. The map appears, and the guidance directions begin. To select a POI by city: To Select a Favorite as a Destination: 1. Tap Menu. The main menu appears. 2. Tap Destination. The Set Destination screen appears. 3. Tap Favorites. The Favorites screen appears. 2. Tap the Letters to enter the name of the city and tap OK. The Enter POI Name screen appears. 3. Tap the Letters to enter the name of the POI and tap OK. The POI Select screen appears. 4. Tap Nav.
b. Tap the Letters to enter the name of the city. Tap OK when you have selected the city. The City Center screen appears. Avoid Road NOTE: you cannot create a detour if you do not have a current destination b. Tap the Letters to enter the name of the city. Tap OK when you have selected the city. The City Center screen appears. To set a detour: Once you have set a destination you can look at the list of streets and determine if you need to mark one or more as unavailable.
To cancel a stopover: Setting an Itinerary Using Shortcuts 1. Tap Menu. The main menu appears. The Itinerary feature allows you to set multiple destinations. You can add, remove, or re-order destinations according to your needs. The shortcut feature provides you quick access to some of the most important destinations while you're on the road, including: Stopovers Once you have set a destination you can add a stopover. Adding a stopover does not cancel your original destination.
Managing Your Favorites List Setting Your Options You can edit the destinations you add to your favorites list to give them descriptive names. You can also remove destinations from your favorites list. You can set many different options to customize the Intellinav system and make it work your way. These options include: Display Options To manage your favorites list: To delete a destination from your favorites list: Speed Alert Localization a. Tap on the favorite you want to delete. b. Tap Del.
a. Tap on the categories you want displayed. The categories to be displayed are highlighted. b. You can use Select All and Clear All to quickly highlight or clear categories. Method To set your display settings: c. When you have highlighted the categories you want displayed, tap OK. You return to the Display Options screen. Toll Roads 1. Tap Menu. The Menu button and then Settings. 2. Tap Display Options. The Display Options screen appears. 7.
8. When you have finished choosing your options, tap OK. Localization The localization options give you control over the settings affected by your location, including: Speed Alert Auto speed alert is based on road class and may not necessarily reflect the actual speed limit. Please use this feature only as a reference To set the speed alert: Time Zone Daylight Savings Time To set auto speed alert: Units a. Tap Auto. A warning appears. b. Tap OK to close the warning. c. Tap OK. You return to the map.
System Settings User Preferences When you first turn on the Intellinav system, you will be asked to calibrate the system. This process ensures that when you tap the screen the item tapped is activated. You can also recalibrate by tapping on System, Sys Info, and Calibration. You can adjust the settings of your device to suit the way you work. Adjusting certain settings, such as those for system volume, power LED, and backlight may increase your standby time.
Backlight Date Time To set the screen backlight level: To set the date: Note: The "Automatically adjust clock for daylight saving changes" will be displayed under the Time Zone setting menu if the daylight saving system is adopted. 2. Tap 2. Tap on / to set the Year, Month and Day. to apply the changes made. 3. Tap to apply the changes made. To set the Time: 1. Tap on Time 2. Tap on To set the screen backlight auto-off function: 1. Tap / under the Battery and AC Power settings. 2.
MP3 Playback To Reset the GPS: 1. Close the navigation program, if it is currently running, by tapping on Menu in the map display, and then Exit in the navigation Menu screen. 3. Tap System Info on the System panel. 4. Tap GPS Reset and then Yes to confirm. 5. The GPS Reset process will take about a minute to complete. 4. Tap Up-One-Level button to return to the root directory. To open the MP3 Player: 5. The selected file will automatically be played.
Photo Viewer Shuffle Mode Each directory containing supported music files is considered a playlist. You can choose to shuffle the playback sequence to play files in random order. 3. Tapping Random icon will automatically disable the Repeat mode. 1. To enable the Shuffle mode, tap (Random). An enabled Shuffle mode is indicated by the word "Random" on the playback display, and a fade-out Random icon. Playback Volume 2. To disable the Shuffle mode, tap the fade-out Random icon.
Full Screen Mode Magnification Slide Show In Full Screen mode, image files can be viewed in a larger scale. You can also change its orientation angle. To change the image magnification level: You have the option to view images in a slide show much like viewing a presentation. Images are adjusted to fit the entire display area and are shown in a 3-second interval. 1. Tap (-) to zoom into the center of the image. To view images in Full Screen mode: 2. Tap / a.
Safety and Regulation FCC Declaration of Conformity Tested to comply with FCC standards for home or office use Reorient or relocate the receiving antenna. Increase the separation between the equipment and external receiver. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help.
TERMS AND CONDITIONS Personal Use Only You agree to use this Data together with the Intellinav system for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes.
Limited Warranty 1 year parts and labor Governing Law The above terms and conditions shall be governed by the laws of the State of Illinois [insert "Netherlands" where European NAVTEQ Data is used], without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded.
Caring for your device Please use only the power adapter included in the box and connects to the voltage requirement indicated on the rear panel of the product. Use of any other types of chargers will result in malfunction of the device and void all warranties. To prevent fire or electric shock, never expose the device to any types of liquid Do not block any ventilation openings or use in extreme weather conditions, such as dusty, sandy, wet or humid.
System Specifications California Vehicle Code Section 26708(a) Minnesota Statutes 2005, Section 169.71 The Intellinav One has the following specifications: Host Start: 1 sec., average SiRF Star III GPS chipset Warm Start: 38 sec., average SAMSUNG S3C2410 (ARM920T) 266Mhz CPU Cold Start: 42 sec., average 64 MB NAND flash + 64 MB SDRAM onboard 210+ g Weight 3.6-inch 16.
Netropa Corporation 1499 Huntington Dr. Suite 305 South Pasadena, CA 91030 Office (626) 403-2866 http://www.intellinav.
