0/100Mbps PCI Ethernet Hub Card With switch Feature User's Manual Switch.HC v2.
Introduction Thank you for purchasing our high performance Ethernet 10/100M switch Hub card. This guide is to provide the installation and usage of the product for network installers or users. The product combines with one PCI 10/100Mbps Ethernet and 5 port 10/100Base switch hub function for the SOHO application Extensive driver support for commonly used network operating systems is available. Hardware Overview The PCI switch hub card has two models.
Features & Benefits : 32-bit high performance Ethernet card. Support Plug & Play function. Using turbo drivers to enhance transfer rate. Support multi-card drivers in Plug & Play mode. Configuration by software or mainboard‘s BIOS. Plug and play, auto-setup IRQ and I/O address. Support one PCI 10/100Mbps LAN card, and 4 TP ports . Compliance with IEEE 802.3 CSMA/CD, 100Base TX and 10Base-T standard, Full-duplex data transfer rate.
computer‘s setup and installation guide. 3.Secure the card to the rear of the computer chassis and put back the computer cover. 4.Connect the product to other 10Mbps or 100Mbps network card using twisted-pair cables. 5.The hub provides a switch for port 4 optional normal or uplink function. The uplink is making it easy to link two hubs together. LED Indicators The Hub card is equipped with LED indicators to provide for display of the card status and enable diagnosis of system problems.
software. Appendix A : Technical Specification Topology : Star/Bus. Protocol : CSMA/CD (Carrier Sense Multiple Access with Collision Detection). Connector : RJ45 . Standard : IEEE 802.3 10Base/100Base Trans Rate :10Mbps or 100Mbps (STP only ). Hardware : PCI Bus compliant PCs. Cable : AWG 22-26 STP or UTP cable. Distance : UTP or STP cable 100 meters for link segments. 600 meters for multiple hubs.
Copyright Copyright 2000 by the manufacture of the prduct. ALL rights reserved. No part of this manual may be reproduced, transcribed, stored in a retrieval system, translated into any language or computer language, or transmitted in any form whatsoever without the prior written consent of the manufacturer. All brand names and models mentioned in this manual are for reference only and are considered to be trademarks or registered trademarks of their respective owners.
