Installation Manual

2
ENGLISH
16-Port Gigabit Ethernet PoE+ Switch English
Thank you for purchasing the Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+
Switch, Model 560993. For specifications, go to intellinetnetwork.com.
CONNECTIONS & INDICATORS
LEDs
The LED indicators — Power,
PoE, Link/Activity — make it
easier to monitor the switch
and its connections. NOTE:
All ports provide power to a
connected device, and all
connected devices should
comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and
uplink ports are not needed for connections to PCs, routers, hubs, other switches, etc.
Cat5/5e/6 UTP/STP cables provide optimal performance; if a status LED doesn’t indicate
a link or activity, check the corresponding device for proper setup and operation.
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet.
Confirm that the power LED on the front panel is lit.
INSTALLATION
Prior to use, it is recommended that the switch be placed/positioned:
• onalevelsurfacewithatleast25mm(approx.1”)ofclearanceforventilation;
• awayfromsourcesofelectricalnoise:radios,transmitters,broadbandampliers,etc.;
• within100m(approx.328’)ofnetworkdevicesit’stobeconnectedto.
Rackmount
The switch includes brackets and screws for optional rack mounting.
1. Disconnect any cables from the switch.
2. Position a bracket over the mounting holes on one side of the switch and secure it
in place with screws.
3. Repeat Step 2 on the other side of the switch.
4. Position the switch in the rack and screw the brackets to the rack.
5. Reconnect any cables.
LED Status Operation
Power On Power on
Off Check the AC connection; turn the power on
PoE On Port is linked to a PSE/PoE device
Off No PSE/PoE device is linked
Link/Act On Valid connection: orange = 10/100M; green = 1000M
Blinking Valid port connection; data transmitted/received
Off No link established
1 3 5 7
2 4 6 8
2 4 6 8 10 12 14 16
1 3 5 7 9 11 13 15
PWR
LNK/ACT/Speed
LNK/ACT/Speed
PoE in Use
PoE in Use