user manual

42
Parameter
Description
Interface Name
The interface name is “br0.”
IP Address
Enter the IP address of the ADSL router for the local user to
access the router’s Web screen. By default, the IP address is
192.168.2.1.
Subnet Mask
Enter the subnet mask of the ADSL router. By default, the
subnet mask is 255.255.255.0.
Secondary IP
Assign a second IP address to the LAN.
IGMP Snooping
Enable/disable the IGMP snooping function for the multiple
bridged LAN ports. When “IGMP Snoop” (Internet Group
Management Protocol Snoop) is enabled, the router can make
intelligent multicast forwarding decisions by examining the
contents of each frame’s IP header. Without the function, the
router will broadcast the multicast packets to each port and
may create excessive traffic on the network and degrade the
performance of the network.
Ethernet to
Wireless
Blocking
Enable/disable the “Ethernet to Wireless Blocking.” When this
function is enabled, the traffic between Ethernet and wireless
interfaces is not allowed.
When you finish, click “Apply Changes.” You’ll see the following message
displayed on Web browser.
Click “Continue” to save the settings made and go back to the Web management
interface; click “Apply” to save the settings made and restart the router so the
settings will take effect after it reboots.