Instructions

19" Intelligent 8-Port PDU User Manual
6
Chapter 3: Functions
Basic Functions
1. Connecting and Powering Equipment: Connect the input power cords from your server/network equipment
to the output ports on the Intellinet 19" Intelligent 8-Port PDU. Connect one end of a power cord to the
input socket and the other to an AC wall outlet. By default, the Intelligent PDU will then power up each
power-out socket from ports one through eight at one-second intervals. The display panel will show the
current supply voltage and total power output as well as the LED indicator lights.
2. Check the IP address: Press the FUNC button to display the IP address, voltage and current. The default IP
address is 192.168.0.100.
3. Check the temperature and humidity: Press the FUNC button after the display shows the IP address to
reveal the temperature and humidity of the environment. The left part of the screen shows temperature and
the right shows humidity.
4. Reset equipment: Press the RST button on the front panel.
5. Network access and control: With the PDU powered-on, users can access and control the host with a PC in
the same LAN by connecting an RJ45 cable to the network port.
Interface Functions
①. Login Control Interface
Open the IE browser on any PC in LAN host and enter the IP address into the address bar: http://192.168.0.100. Log
in to the Intelligent PDU control interface (shown below) by entering the administrator credentials that follow into
the login screen:
User Name: admin
Password: admin