User`s manual

122
8.4.4 SMB
You can enable/disable the SMB protocol from here. If
SMB is enabled, enter the “SMB Group Name” to specify
the SMB group that this print server belongs to. All PC
should join the same group before they can use this print
server by SMB protocol.
Pass Job when Error Occurred: When the printer is
interrupted because of paper out or off line while printing,
user can enable this function and set the interval time to
bypass the current printing job. Or the printing document
will not be printed completely or with unformatted
messages.
Waiting Time to Pass Job: The range is from 1 to 60
seconds. By default, the parameter is enabled and the
default waiting time is 20 seconds.